HP10+ / HP16+ FORCE/DISPLACEMENT CONTROL
with optional force/displacement control
- Stable C-frame: Our press frames are milled from solid, making them even more solid and durable then press frames made of cast iron.
- Press force 100 kN (10 Tons) / 160 kN (16 Tons): Our proven double acting hydraulic cylinders have a very high repeat precision, due to their compact and robust design, they are extremely durable.
- Stroke 2-120 mm infinitely adjustable: Via two rod-managed sensors, the stroke can be easily adjusted.
- Ideal for punching, bending, embossing, molding, leveling, gluing: With the right tool, the applications are almost limitless. We would be happy to construct a suitable tool for you that meets your requirements.
- Ideal together with » toolsystem W14: Our proven standard tool systems, are easy to assembly and exchange. If the tools are worn out, we offer you cost-effective maintenance
- Pressure infinitely adjustable between 15-100 kN / 23-160 kN: You can easily adjust the pressure of the press using a rotary switch on the valve block behind the cylinder.
- Easy handling: When you operate the two-hand control or the foot switch, the press moves down, as soon as you let go of the control, the press moves up again.
- Punch holder and table spindle with adjustable rotary stop: Our brass anti-rotation devices can be easily readjusted, when they are worn out, and therefore rarely if ever have to be replaced.
- Precise height adjustment: The MICRO ADJUST system allows fast and precised height adjustments of the press table.
- Height adjustment without tools with quick clamp lever: The quick clamp lever simplifies setting up new tools and increases the possible applications of the press.
- JOSSI-standard-table with height fine adjustment over 75 mm reading 0.1 mm. Height adjustable press table is completely removeable.
- Table-hollowspindle with aperture 34 mm: Stamping waste (or stamping products) fall through the hollow spindle and can be collected in a container or drawer below.
- Thread available for installing deep-drawn spring cushions or ejector springs: For larger workpieces that tend get jammed, an ejector can be installed, which greatly simplifies the handling of the press.
- With CE-compliant two-hand control and foot switch (Foot switch only up to 6mm stroke or with a safe tool): The foot switch allows you to freely handle the workpieces while the press is moving.
- Adjusted repeatable accurate end position.
Description | HP10+ | HP16+ | Unit | Press Force | 100 | 160 | kN |
---|---|---|---|
Stroke (Infinitely Adjustable with Proximity Switch) | 2-120 | 2-120 | mm |
Punch Speed DOWN | 37.4 | 27.9 | mm/s |
Punch Speed UP | 51.9 | 33.8 | mm/s |
Punch Speed Setup Mode | 10 | 10 | mm/s |
Hold Time (Only when Moving on Pressure) | 0-1.5 | 0-1.5 | s |
Indexing Accuracy without Cylinder Stopper | 0.2 | 0.2 | mm |
Indexing Accuracy with Cylinder Stopper | 0.01 | 0.01 | mm |
Tool Installation Height with Height Adjustable Table Plate | 251 | 251 | mm |
Tool Installation Height with T-groove Table Plate | 293 | 293 | mm |
Tool Installation Depth with Height Adjustable Table Plate | 120 | 120 | mm |
Tool Installation Depth with T-groove Table Plate | 350 | 350 | mm |
Tool Installation Width with Height Adjustable Table Plate | 150 | 150 | mm |
Tool Installation Width with T-groove Table Plate | 350 | 350 | mm |
Height Adjustable Stroke Table with Setting Scale 0.1mm | 0.1 | 0.1 | mm |
Throat Depth | 190 | 190 | mm |
Weight | 970 | 970 | kg |
Power | 4 | 4 | kW |
3-sided Protective Cover, 650mm Access Opening | Yes | Yes | Standard |
CE-compliant Two-hand Control and Protective Cover | 37.4 / 51.9 | 27.9 / 33.8 | mm/s |
Safety Light Grid with Finger Protection | Yes | Yes | Option |
Noice Protection Hood for Hydraulic Unit | Yes | Yes | Option |
W14 Tool System | Yes | Yes | Option |
Adjustable Stroke Limiter with Scale Dial 0.02mm | Yes | Yes | Option |
Rotary Table With Servo Drive and Light Grid | Yes | Yes | Option |
Sub Construction as Welded Assembly | Yes | Yes | Standard |
Foot Switch with 6mm Stroke or Safe Tool | Yes | Yes | Standard |
With Optional Force/Displacement Control | |||
Press Force min. | 15 | 23 | kN |
Press Force max. | 100 | 160 | kN |
Press Force Repeatable Accuracy | 1 | 1 | kN |
Path Measuring System | 0.01 | 0.01 | mm |
C-PRESSES BROCHURE PDF-DOWNLOAD [17’096 KB]
(layouts and brochures in english available on request)
-
Standardausführung
-
Option mit T-Nut Tischplatte
-
Option mit Rundtisch